Skip to content
HespelerDoor & Opener Co.Open 24/7 (226) 887-1169

Hespeler Door & Opener Co.Bulletin 3 of 3Cambridge, Ontario

Garage Door Roller Replacement: comparing quotes

A heavier door needs rollers with a load rating to match, generally ball-bearing rollers rated around seventy-five to one hundred pounds each rather than the light plastic wheels many doors ship with.

Technician on a blue stepladder using a wrench on a black torsion spring bar above a sectional door with small windows.
Every part checked, every cycle tested.

A heavier door needs rollers with a load rating to match, generally ball-bearing rollers rated around seventy-five to one hundred pounds each rather than the light plastic wheels many doors ship with. It often needs long-stem rollers at the double hinges on the end stiles, and the top rollers, which travel furthest under load, deserve the sturdiest in the set. Nylon with ten or more bearings suits most insulated residential doors; very heavy or commercial-weight doors may still call for steel.

Combining with spring or cable work

If springs or cables are being replaced in the same visit, the door is secured once and the roller set is added to that job, which is often more economical than a separate call.

Salt and rust in the lower track

A track full of brine, scale and grit needs cleaning before new wheels go in, and heavy corrosion can extend to the brackets and cables, adding to the scope of the visit.

Relieving spring tension for the bottom rollers

When the bottom brackets have to be unbolted, the technician takes the spring load off first with winding bars, skilled extra work that is included in the figure for that position.

On-site assessment

Request a visit.

Set up a visit

(226) 887-1169, open 24/7.